Photocopier Security Checklist: 8 Things to Check on Your Office Copier
In brief: The Photocopier Shop explains: Eight settings that decide whether your office photocopier is a secure part of the network or the weakest device on it, and how to check each one.

Most photocopier security problems are settings problems. The machine can protect itself, but it was installed in a hurry and left as it came out of the box. This checklist needs the admin login and tells you where you stand.
If you lease or rent the machine, your supplier should be able to answer every point. If they cannot, that is worth knowing too.
1. Has the admin password been changed?
Factory admin passwords are printed in the user manual. Log in to the copier's web page with the default and see whether it lets you in. If it does, change it today and store the new one with your other IT credentials.
2. Is the hard drive encrypted?
Look for hard drive or SSD encryption in the security settings. Develop ineo i-Series machines support AES 256 drive encryption. Once on, the stored data is unreadable if the drive is taken out of the machine.
3. Is job data being overwritten?
Separately from encryption, the copier can overwrite the temporary data left behind by each print, copy and scan. Check it is enabled, and whether it runs after every job or on a schedule.
4. Do people log in to use it?
User authentication means a PIN, password or ID card before the machine will copy, scan or release a print. It gives you a record of who did what, lets you limit colour or scanning to the people who need it, and stops a visitor walking up and using the address book.
5. Is secure print switched on?
With secure print, a job waits in the machine until its owner releases it at the panel. Nothing sits in the output tray. It also cuts waste, because jobs nobody collects are never printed. Larger offices with several machines can use follow-me printing to release a job at whichever copier is nearest.
6. Which network services are open?
Ask your IT provider to look at what the copier has enabled. Turn off the protocols you do not use, restrict access to the admin page, and use IP filtering so only your own devices can send jobs. Check that scan to email and scan to folder are using encrypted connections.
7. Is the firmware current?
Manufacturers release firmware updates that fix security flaws. Ask your supplier when the machine was last updated and whether updates are part of your service agreement.
8. Is anything scanning the files themselves?
Everything above controls who can reach the copier. None of it checks whether a file passing through is infected. Develop ineo i-Series photocopiers can take an optional Bitdefender® antivirus engine that scans print, scan and fax data in real time and blocks any job carrying a virus. Our photocopier security page explains what it covers and which machines it is available on.
One more: what happens at the end of the lease?
Before a machine leaves your building, the drive should be wiped and the address book, user boxes and saved logins cleared. Get it in writing that this has been done. If you are comparing suppliers, ask how they handle it before you sign rather than five years later.
Where to start
If you only do three things, change the admin password, encrypt the drive and turn on secure print. They use features the machine already has and close the gaps that are most often left open. For the reasoning behind each item, see can a photocopier be hacked?
We can go through this list with you as part of installation and support.
Frequently asked questions
How do I make my office photocopier secure?
Change the default admin password, turn on hard drive encryption and overwrite, require users to log in, use secure print, close unused network services and keep the firmware updated. On machines that support it, add antivirus so the files passing through are scanned as well.
Should a photocopier hard drive be wiped at the end of a lease?
Yes. The drive can hold job data, the address book and saved logins. Have it wiped and the settings cleared before the machine leaves your premises, and ask the supplier to confirm in writing that it has been done.
Is secure print the same as antivirus?
No. Secure print holds a job until its owner releases it at the machine, which stops documents being left in the tray. Antivirus inspects the files themselves for malware. They solve different problems and work together.